Marking the floor with a chalk line

[zihadhosenjm40]

It is best to start laying from the inside, this will reduce errors. In the middle of the control line, a perpendicular is drawn, relative to which, along the base line, laying is carried out on different sides.

Parallelism control is carried out every 3-4 meters, focusing on saudi arabia mobile database seams along which control lines are drawn, parallel to the base lines.

To control perpendicularity, it is necessary to draw a control line 6-7 meters from the laying line, which will be perpendicular to the base line. Measurements of the laying accuracy are taken along this line in various places. These measurements should be the same. If the measurements obtained are different, then the tiles are adjusted. This may be useful: how to lay floor tiles (video).

Conclusion. In some cases, situations may arise in which the tile is clamped in one place and comes apart in another. The main thing here is to accurately determine the reasons for what happened and to correctly adjust the installation before the adhesive has hardened.

back to contents>Laying floor tiles

Introduction
Laying floor tiles is one of the most important stages of apartment renovation. High-quality laying of floor tiles requires some skill, but if you follow the technology and do the preparatory work, you can do it yourself.

Choosing tiles for flooring
For laying floor tiles, tiles with increased strength and a non-slip surface are suitable. Tile class B2, with moisture absorption of 3-6%. The optimal size of floor tiles is 30×30 cm; 33.3×33.3 cm; 45×45 cm. The thickness of floor tiles is from 8 mm to 12 mm.

Laying floor tiles - preparing the base