Degreasing agents – acetone, white spirit, kerosene.
This method of painting requires some preparation. To find special dyes and primers for painting aluminum elements (bumpers, boats or corrugated sheets), you will have to study the assortment of more than one hardware store. It is worth buying epoxy or acrylic dye. For home processing, it is better to choose an aerosol than a powder dye. chinese overseas america data , finding and buying materials is one of the initial stages of processing. Alternative painting of aluminum consists of performing the following operations:
Sand the surface. You should get a uniform matte surface. It is best to use sandpaper with abrasive 1200.
Removal of dust and dirt.
Degreasing with special compounds.
Treatment with a special primer. Moreover, it is necessary to finish priming before the degreasing effect ends.
Uniform application of paint from a spray can onto a primed surface. It is applied in 2-3 layers with a small gap necessary for the previous one to dry.
Drying of the part for 6 hours.
Applying a protective varnish to the dried surface.
If necessary, polish the finished surface.
A less complicated version can be used if you have a grinding machine. After careful grinding, the surface is quickly treated with a special enamel. In this case, you must strictly follow the instructions for using the paint composition. If you have the necessary materials and tools, this method is very simple.
To carry out all the activities with your own hands, you need to be ready to quickly carry out all the stages, acquire basic knowledge of chemistry and reactions, as well as improvised means. For a detailed study of the process, you can use the provided video and study the photos, which explain all the nuances of the procedure. In this case, it will not be difficult to carry out high-quality painting.
We also recommend reading: