How to make a mansard roof yourself

[zihadhosenjm40]

A counter-batten is stuffed on top of the waterproofing, which will better fix the film on the surface and create a ventilation gap between the roofing and windproof material. Usually, the counter-batten is made of boards 50-70 mm thick and 100-150 mm wide.

The lathing is fixed perpendicular to it, onto which the roofing material is laid. As for the step between the slats, it is calculated depending on the size and type of sheet roofing material, taking into account the overlap required for it.

If you use soft roofing, then plywood sheets are usually attached to the counter-battens.

How is roofing installation carried out?

The roofing material is fixed to the prepared costa rica mobile database or lathing. Usually, its installation starts from the eaves of the roof and then alternately, from one of the edges - depending on the type of roof. The roofing sheets themselves are installed with an overlap. If metal tiles or a metal profile are used for the covering, then this material is fixed with special self-tapping screws with elastic gaskets. Usually, fasteners are selected according to the color of the material.

The most difficult stage in covering a broken roof is the transition from the sloping side rafters to the ridge rafters. Some difficulties may also arise if the roof has projections for arranging the roof over windows or balconies.

Moreover, if a chimney pipe comes out onto the roof, it requires a separate design of the hole in the insulation layer and rafter system, and on the roof - the installation of reliable waterproofing around it.

You can also find out what material is best to use for the roof of the attic on our construction portal in the relevant section.

Video: DIY Mansard Roof Construction
It is worth noting that the work on the construction of any roof, including such a complex one as a mansard roof, is very responsible and dangerous, therefore it requires increased safety measures. If you do not have experience in such construction processes, it is better to entrust their implementation to specialists or invite an experienced master, under whose supervision to perform all actions carefully and cautiously. Share: