Steel structures are most often made single-leaf, double-leaf, with or without a wicket.
Single leaf
Single-leaf gates have only 1 leaf. They can be swing, sliding, and lift-and-turn. The simplest design is one in which hinges and 1 leaf are welded to 1 post. It can open both inward and outward.
However, with such installation there is a possibility of the sash skewing under its own weight during regular use. Sliding options are more reliable, in which the sash has a support, which allows for better distribution of its weight and reduces the risk of breakage.
Bivalves
If you need to build a metal gate with cyprus mobile database own hands, preference should be given to simple swing double-leaf options. Such structures have 2 leaves that are installed on posts.
In this case, the gate leaves open in both directions. Most often, the opening is towards the yard. Using 2 leaves allows you to reduce the load on the posts and hinges. It is possible to install double-leaf structures using a sliding method.
Double-leaf with a wicket
If there is a need to install a wicket, it can be made in the canvas of 1 of the sashes. The wicket area must be additionally reinforced with a profile. It is installed in the area of the hinges. This will reduce the load when frequently opening and closing the wicket.
Optimal dimensions of metal gates
The width of the gate can be very different, but many owners of summer cottages and cottages try to make them no more than 3 m. This is enough for a car to pass. The recommended height of the gate is at least 2 m. However, this parameter largely depends on the type of the chosen design.