The operation of installing the casings is the final one and is performed with or after the installation of the baseboards. It is similar to the fastening of the cornices, in the sense that it is performed after all finishing works are completed.
To make the process of installing door frames clear to everyone, we will break it down into several stages.
Preparatory stage
It is necessary to check the evenness and flatness of the walls adjacent to the doorway. If the walls are very uneven, they must be leveled. And this must be done without fail.
Attention! When aligning the walls, carefully el salvador mobile database their mutual arrangement. The walls must not only be aligned, but also placed in the same plane on both sides of the opening.
Failure to follow this recommendation will result in small gaps between the door frames and the wall.
Casings can hide unevenness and cracks up to 3 mm. But it will not be possible to cover unevenness differences of more than 3 mm using casings. Knowing how to attach casings correctly, you can hide all the unevenness and gaps.
The use of door trims not only gives the room an aesthetic appearance, but also creates a finished look.
The installation of door trims can be compared in importance to the installation of baseboards or nailing of cornices.
Necessary tool
A few words about the tool used.
When installing casings, the main problem is adjusting the mating parts at the right angle. Casings are installed either at a right angle, but most often at an angle of 45º. It is best to use a miter box.