Caring for screens
Posted: Thu Feb 06, 2025 9:12 am
Step 1. Measure the dimensions of the future structure, taking into account that there should be free space between its upper edge and the ceiling for ventilation.
Step 2. Make the appropriate markings on the plastic sheets, cut out the screen elements, clean the edges and attach the handle. Cut the guides of the required length from the aluminum profile.
Step 3. Using a level, mark the attachment points for the indonesia mobile database on the walls, drill holes for the dowels, attach the profile to the wall surface, having previously coated it with sealant.
Step 4. The lower guide must be attached to the edge of the bathtub with the same sealant, and before moving on to the next steps, the composition must be allowed to dry well.
After all the profile elements are secured, you can try to insert the plastic part into the resulting frame and make sure that it does not wobble and moves easily along the guides.
DIY Screen
Maintenance of such structures is not a complicated process, but it requires compliance with a number of rules, since the appearance and service life of the screens depend on this.
After hygiene procedures, it is advisable to leave the door open so that moisture does not accumulate behind the screen.
Glass products can be washed with any cleaning agents, and in the case of plastic, you should choose non-aggressive household chemicals without abrasive particles, otherwise the surface will quickly become scratched and cloudy.
Step 2. Make the appropriate markings on the plastic sheets, cut out the screen elements, clean the edges and attach the handle. Cut the guides of the required length from the aluminum profile.
Step 3. Using a level, mark the attachment points for the indonesia mobile database on the walls, drill holes for the dowels, attach the profile to the wall surface, having previously coated it with sealant.
Step 4. The lower guide must be attached to the edge of the bathtub with the same sealant, and before moving on to the next steps, the composition must be allowed to dry well.
After all the profile elements are secured, you can try to insert the plastic part into the resulting frame and make sure that it does not wobble and moves easily along the guides.
DIY Screen
Maintenance of such structures is not a complicated process, but it requires compliance with a number of rules, since the appearance and service life of the screens depend on this.
After hygiene procedures, it is advisable to leave the door open so that moisture does not accumulate behind the screen.
Glass products can be washed with any cleaning agents, and in the case of plastic, you should choose non-aggressive household chemicals without abrasive particles, otherwise the surface will quickly become scratched and cloudy.