Insulation of foundation walls with penoplex
Posted: Sun Feb 09, 2025 7:00 am
Types of penoplex
There are 5 types of this insulation. One of the types is intended for road construction - Penoplex 45. The remaining 4 types are applicable for residential buildings.
Penoplex Foundation is used in the construction of basements and foundations. The slabs prevent freezing on the walls and the appearance of cold bridges.
Penoplex Wall is designed for insulating the facade, basement and walls of a house.
Penoplex Roofing is used in all of roofing, when insulating the attic.
Penoplex Comfort is a universal material, applicable for uae mobile database summer houses, balconies and loggias of city apartments.
Quite close in structure and characteristics is polystyrene foam, with the help of which homeowners often insulate the walls of private houses both outside and inside. To make the floor in the house warm, you can use polystyrene foam. In addition to the house, do not forget that other buildings on the site should also be insulated, so we recommend that you read our article on insulating a bathhouse from the outside http://vse-postroim-sami.ru/building/th ... -snaruzhi/.
Insulation with penoplex
The procedure for insulating walls with penoplex from the outside with your own hands takes place in 10 steps.
1. Prepare the walls. At this stage, remove old peeling plaster and paint, clean the surface from dirt. Treat areas affected by fungus and mold with a solution with bactericidal properties.
2. Level the surface. There should be no pits or bulges on it. Otherwise, the slab may break during installation. If there are 2 cm deep irregularities, plaster the wall and let it dry completely. Then prime the surface.
Increasing the coefficient of adhesion by imparting unevenness with a needle roller
There are 5 types of this insulation. One of the types is intended for road construction - Penoplex 45. The remaining 4 types are applicable for residential buildings.
Penoplex Foundation is used in the construction of basements and foundations. The slabs prevent freezing on the walls and the appearance of cold bridges.
Penoplex Wall is designed for insulating the facade, basement and walls of a house.
Penoplex Roofing is used in all of roofing, when insulating the attic.
Penoplex Comfort is a universal material, applicable for uae mobile database summer houses, balconies and loggias of city apartments.
Quite close in structure and characteristics is polystyrene foam, with the help of which homeowners often insulate the walls of private houses both outside and inside. To make the floor in the house warm, you can use polystyrene foam. In addition to the house, do not forget that other buildings on the site should also be insulated, so we recommend that you read our article on insulating a bathhouse from the outside http://vse-postroim-sami.ru/building/th ... -snaruzhi/.
Insulation with penoplex
The procedure for insulating walls with penoplex from the outside with your own hands takes place in 10 steps.
1. Prepare the walls. At this stage, remove old peeling plaster and paint, clean the surface from dirt. Treat areas affected by fungus and mold with a solution with bactericidal properties.
2. Level the surface. There should be no pits or bulges on it. Otherwise, the slab may break during installation. If there are 2 cm deep irregularities, plaster the wall and let it dry completely. Then prime the surface.
Increasing the coefficient of adhesion by imparting unevenness with a needle roller