Features of installing thermal panels with your own hands

[zihadhosenjm40]

Like most other modern building materials, thermal canada mobile database can be installed in several ways - using a frame and directly on the wall. The best way to install this material is to mount it on the wall surface, but it is not always possible - for example, if the walls have a significant deviation from the level, it is advisable to install a frame. Let's consider these two options for installing thermal panels in more detail.

Frameless installation option – as already mentioned above, it is possible only with smooth wall surfaces. The idea behind this installation option is that the panel is simply nailed to the brick wall with dowels through holes made by the manufacturer.
The frame method looks almost exactly the same, but the panels are screwed or nailed not to the brick, but to the supporting beams of the frame - the difference is small, in addition to the ability to level the wall surfaces, the frame does not give anything. You can even say so - with this installation option, it will even harm. Air will circulate in the space between the thermal panel and the wall, taking heat from the house - this is why after fixing the first row of thermal panels, the space between the wall and the panel is sealed with construction foam.
In all other respects, finishing a brick house with facade panels is done in exactly the same way as with any other building materials.

First, the base is installed - in this case, the panels are deepened into the ground by at least 10-20 cm - the upper part of the base thermal panel must be sealed with construction foam. Then, the ebbs are attached to the base, and only after that the first row of slabs is laid - everything must be done according to the level and clearly, without any deviations.

As already mentioned above, the first row of slabs is sealed with construction foam to prevent air circulation in the space between them and the brick - sealing is required both for frame installation and for frameless installation. And then, as usual - the second row is laid after the first, then the third, and so on until the end.

Much attention should be paid to the slopes - they are installed in a standard way using a corner element, thanks to which all corners are mounted. There are internal and external corner parts. But that is not the point - before attaching thermal panels to the slopes, they must first be insulated. In all other respects, there are no difficulties during installation - sometimes you even wonder why builders charge so much money if we are talking, so to speak, about assembling an ordinary construction set.