Choosing a material for the greenhouse frame

[zihadhosenjm40]

It should be taken into account that water for irrigation and electricity for lighting will be needed. Therefore, the greenhouse should be located on the site in an acceptable proximity to these sources.

When considering the choice of material for the supporting structure of a greenhouse, it should be noted that each of them is good in its own way. The following materials are considered the most popular today:

Wood. Wooden structures are easy to manufacture, no professional skills are required. Antiseptic treatment of the structure is required.

Aluminum. Low specific gravity of the metal and sufficient strength give the frame an aesthetic appearance, stability and durability. The high price of the profile is the main obstacle to widespread use.

Plastic. Metal-plastic profile due to its low specific italy mobile database and sufficient strength has gained popularity among summer residents. Relatively low price and high performance characteristics have become the hallmark of this material.

Steel. Galvanized steel profiles are quite popular in greenhouse construction. Installation of a frame made of galvanized profile pipe does not require special training and equipment. A strip foundation must be installed under such a frame.

Installation of the supporting frame of the greenhouse and covering
A reliable frame design will guarantee protection of plants from the scorching rays of the sun and torrential rains.

After the concrete in the foundation has gained the required strength, the frame elements can be prepared for assembly. The lower belt elements and the posts are connected to each other with bolts.

The elements of the upper belt and roof slopes are successively connected into a spatial structure with rigid connections. The entrance door is located on the leeward southern side.