To do everything correctly, the following conditions must be met:

Enhancing business success through smarter korea database management discussions.
Post Reply
zihadhosenjm40
Posts: 520
Joined: Sat Dec 21, 2024 3:26 am

To do everything correctly, the following conditions must be met:

Post by zihadhosenjm40 »

Installation of heat exchanger
Many people who have assembled the unit with their own hands wonder how to properly install a heat exchanger for a sauna stove. The maximum effect that can be achieved from the device depends on this procedure. An important point is the height of the water tank installation, it should exceed the height of the heat exchanger mount. The process of installation and assembly should be carried out using metal, or you can use metal-plastic pipes, connecting the main elements of the system.


hot water moves to the main tank at an angle of 30 degrees if a pump is not installed;
the connection diagram for the bath heat exchanger moj data a pipe for supplying cold water, placed below at an angle of 2 degrees;
the water tank must have a water intake tap;
a tap is provided to drain water from the system;
the fasteners should not provide a tight fixation of the pipes to the wall. During the heating process, the material expands, and incorrect fasteners can cause an accident;
the power of all heating equipment must be proportional, pre-calculated;
if the heat exchanger is to be mounted on a chimney with a diameter of 115 mm, a lightweight structure should be made;
In places where pipes and units are connected, it is recommended to use seals that can withstand high temperatures. This will prevent liquid leaks.
Particular attention is paid to the material from which homemade or purchased equipment is made. Its main characteristic should be optimal operation at high temperatures. If this condition is not met, it is necessary to select the appropriate material.

Bath tank on a pipe - advantages of use
Anyone who builds their own bathhouse faces the question of how to heat the water. Of course, you can avoid this issue by simply placing a barrel of water in the steam room. The bathhouse is heated - the water is heated. This is what our ancestors did. In winter, they filled the barrel with snow, and then washed themselves with melted water.

But progress is moving forward, and modern snow in the vicinity of megalopolises is not worth washing your face with, the ecology is different now. Perhaps in the remote Siberian taiga you can still collect some clean snow.
Post Reply