The installation of a wooden frame for lining consists of several stages:

[zihadhosenjm40]

The lathing should be installed as evenly as possible, otherwise the lining may become skewed. Wooden lathing has a shorter lifespan than a frame made of metal profiles. But a wooden frame is more suitable for covering the ceiling with wooden lining.


If there is no need to lower the ceiling level, then wooden beams are attached directly to the ceiling surface.
To level the frame, use wedges made of wood or plastic.
First, brackets are installed on the ceiling, and then beams are attached to them.
If the ceiling is covered with plastic lining panels, then bc data america craftsmen recommend maintaining a distance of 40-60 cm between the wooden beams. For lining panels made of solid wood, the distance between the beams should be from 60 to 100 cm, respectively.

Recommendation: using a construction gun will reduce the time and speed up the process of installing a wooden frame.

Installation of metal lathing consists of the following steps:

Take measurements of the height of the room in all corners, thereby determining the lowest point.
Measure a line 5-10 cm from the selected point - level.
The initial metal profile is attached along the entire perimeter of the walls, taking into account the established level. Dowels can be used as fasteners.
It is necessary to attach hangers for the profile to the ceiling surface. The hanger plates are bent downwards.
Metal main profiles are attached to hangers and starting profiles.
Before final fastening, the level of all frame profiles should be checked.
The choice of lathing depends on preferences and financial capabilities. Metal profiles are durable, but also more expensive than a wooden frame.